How to connect MikroTik to VPN server

Import ".ovpn" configuration file to MikroTik

• Log in to MikroTik web interface and click the “WebFig” button. (1)
• In the menu on the left, select “Files”. (2)
• And in the “Upload” field, click the “Select file” button. (3)

• Find the ".ovpn" file you need and upload it (1), (2).

After downloading the “.ovpn” file, you need to extract it.

• Go to the “Terminal” button (1) to open a command prompt.
• In the command prompt, enter the following commands (2):

certificate/import file-name=$file.ovpn. 

• Enter user password:

"$file.ovpn" (passphrase: *************)
	

• To see the information about the imported certificates, enter the command (3)

certificate/print
	

Creation of OVPN Client:

• Click on the “WebFig” button. (1).
• In the menu on the left, select “Interfaces” option. (2)
• Create an OVPN client “OVPN Client”. (3)

To connect MikroTik as an OVPN-Admin client, the following basic settings are required:

• OVPN client name, “ovpn-out1”. (individually) (1)
• Maximum MTU, “1340”. (individually) (2)
• Remote IP address of the OVPN-Admin server. (individually) (3)
• OVPN-Admin server port, “1194”  (4) 
• The protocol that the VPN will work with is “udp”.  (5)
• Username, “admin_test”. (individually)   (6) 
• User certificate, “admin_test.ovpn_0”. (individually)  (7) 
• Authorization, “sha1”  (8) 
• Cipher-VPN, “aes 256”  (9) 
• Click the “Apply” button (10) to apply the settings and click the Ok button (11) to save the changes. Then check the status.