Tag: VPN

Connection to the OVPN-Admin server for Windows OS and Mac OS For each user, an “.ovpn” configuration file is generated. It is the second step of authorization and it is downloaded to the device that needs to be connected to a VPN. Download the “.ovpn” file using the “Download config” button (1) Find the downloaded file “.ovpn” (2) To import the configuration file, install the OpenVPN Connect utility following the instructions: https://openvpn.net/client-connect-vpn-for-windows Import the “.ovpn”...

The Enterprise VPN Server is based on the open-source OVPN solution. You can set it up in minutes. Steps to follow after deploying OVPN: Enter the address of your server in the address bar of your browser, for example: https://123.45.67.89 (1) If appears a warning about the lack of an SSL certificate, ignore it. Log in with the username “root” and password (2) . Now you can use your OVPN-Admin access server: add users, configure and check the necessary parameters on the OVPN-Admin page. User management...

Change a static address within VPN network To set a different static IP address within VPN network, please follow the steps below: Go to the “Edit routes” button (1) . В Enter a new IP address in the specified field (2) . It must be within the range of your VPN network, for example (10.0.0.10). Use the “Save” button (3) , to save your changes. After that, establish again the connection between the client and the VPN server. Add a route to another network/h2> To add a route to another private network...

Import ".ovpn" configuration file to MikroTik Log in to MikroTik web interface and click the “WebFig” button. (1) In the menu on the left, select “Files”. (2) And in the “Upload” field, click the “Select file” button. (3) Find the ".ovpn" file you need and upload it (1), (2). After downloading the “.ovpn” file, you need to extract it. Go to the “Terminal” button (1) to open a command prompt. In the command prompt, enter the following commands (2): certificate/import file-name=$file.ovpn. Enter user...

To connect to a private network, you need the following: a private network (private VLAN) an ordered and installed VPN server. Connect an additional interface to a VPN server in a private network. Configure the interface in the Netplan configuration file, and check the private network connection: find and open the Netplan configuration file with any editor convenient for you (1) add your personal data „Interface name”, „IP address”, „Mask”, then check the syntax (netplan generate), if there are...

Together with the BusinessVPN server, you get a static IP assigned only to you and you can use it to restrict access to your resources: Iptables configuration Configure iptables rules to restrict access to your Linux server. To set up access to your Linux server only via SSH, enter the following commands: iptables -I INPUT 1 -s $VPN_IP/32 -p tcp -m tcp --dport 22 -j ACCEPT iptables -I INPUT 2 -j DROP iptables-save > /etc/iptables/rules.v4 where $VPN_IP is the static IP address of your VPN server...